News

HUD Flocking for Cars: Removing Display Glare and Ghosting

Published

Driver view of a clear head-up display projection

From the outside, flocking is sold on looks and touch. From the inside, function is what makes it matter, and glare suppression is the most underrated of those functions.

Flocking controls glare because it builds a trap for light. A smooth inner wall cannot hold light, so stray rays escape and produce glare and ghosting. With flocking, millions of upright fibers trap the light, which bounces and is absorbed layer by layer until almost nothing is reflected back.

Why HUD needs flocking: specular reflection and ghosting

In a head-up display, projected light or sunlight reflecting off the inner wall of the hood becomes stray light, causing ghost images on the windscreen, soft edges and lost contrast. Conventional matte coatings and plastic grain are limited by their microstructure and absorb large-angle oblique light poorly, so specular reflection can remain and disturb the driver's reading of key information.

Planting millions of black fibers vertically inside the hood gives the cavity an enormous internal surface area. Light undergoes multiple diffuse reflections and loses energy quickly, producing very low reflectance and maximum stray-light absorption for a sharp, stable image with crisp edges.

Four key figures

Low reflectance: tested by Weipu, overall reflectance of the flocked layer is 9.8 percent or less, cutting reflections off the hood wall so the projection stays readable in direct sun and under cabin lighting at night.

High adhesion: shedding is held to 10 fibers per square centimetre or fewer, so fibers do not contaminate the optical path and image quality stays clean over the system's life.

Long life: 200 hours of intense UV ageing passed, with no fading or embrittlement under prolonged sun exposure.

Low emission: meets the strict VOC limits applied to instrument panel tops, keeping cabin air safe.

Process precision: density consistency and complex parts

Flocking density consistency exceeds 95 percent and fiber length is controlled from 0.3 to 5.0 mm, giving an even pile height. This removes the uneven thickness of manual processes and solves consistency on deep-recess and free-form parts.

From automotive displays to optical equipment, performance is what makes functional flocking worth it.