News

Fixing Flexible Shaft Noise: Automotive-Grade Flocking Yarn

Published

Close-up of a flocked flexible shaft end where the black flocked section meets the metal spring

Flocking yarn is wound onto the shaft or cable surface to form a continuous circumferential fibre layer. The compliant pile cushions direct contact, dissipates local micro-vibration and keeps coverage stable in service, which lowers friction and structural noise.

Noise reduction in operation

It buffers the direct contact between the moving part and its conduit, reducing operating noise.

Specification and performance

  • Coverage: 1800-9500 dtex (1.05-5.6 Nm) for different part requirements
  • Strength and wear: precise tension control, tensile strength over 50 N, elongation over 15 percent, more than 10,000 abrasion cycles with no fiber laydown or visible shedding
  • Process stability: compatible with mainstream winding equipment, dtex and outer diameter tolerances below 5 percent for stable volume delivery

Technical data

  • Core material: PA6 / PA66 / high-tenacity polyester
  • Fiber material: PA66 / PA6
  • Tensile strength: over 40 N to over 60 N, customizable
  • Yarn denier: 1800-9500 dtex (1.05-5.6 Nm), customizable
  • Cone weight: 2-4.5 kg
  • Environmental: low VOC, no odour

Applications

Power seat shafts, sunroof shafts, office chair mechanisms and textile applications.

For samples or parameters customized to your application, contact Special Flocking.